How to Measure Anything on Your Property Using YardPro

YardPro lets you measure any area on your property in seconds, directly from your phone, with no tape measure required. Draw a shape on your property map and YardPro instantly calculates the square footage. Whether you are measuring a pond, your full yard, a concrete pour, or a repair zone, the process is the same: open the map, draw the area, get the number.

Measuring things on a property used to mean walking the perimeter with a tape measure, doing the math in your head or on a notepad, and hoping you did not miss a corner. For irregular shapes like a pond or a landscaping bed, the math got complicated fast. For something like a repair patch or a concrete pour, the margin for error meant either ordering too much material or running short halfway through the job.

YardPro replaces all of that with a GPS-accurate area tool built directly into your property map. You draw the shape by walking the boundary or tapping it out on the satellite view, and the square footage appears instantly. The area stays saved on the map with a label, a category, and any photos you want to attach, so the measurement is there the next time you need it.

Here is how it works for four of the most common measurement jobs on a property.

How Do You Measure the Size of a Pond?

Ponds are one of the hardest things to measure with traditional tools because no two sides are straight. A tape measure only works in a straight line, and irregular shorelines mean any hand-drawn estimate is going to be off. With YardPro, you trace the pond edge directly on the satellite image by tapping around its perimeter. YardPro connects the dots, closes the shape, and calculates the enclosed area in square feet.

For pond owners, this matters when calculating aeration requirements, fountain sizing, chemical treatment rates, and stocking density. Most product labels give dosing in square feet or surface acres. If you do not know your pond size accurately, you are guessing on every one of those calculations. A pond that looks like half an acre might be 0.3 or 0.7 acres, and that difference changes your treatment volume significantly.

Once you draw the area in YardPro, label it "Pond" and assign it a category. The measurement lives on your map permanently. Next spring when you reorder aeration tablets or call the pond service company, the number is already in your phone.

How Do You Measure the Total Size of Your Yard?

Measuring your full yard square footage is useful for a surprisingly long list of things: fertilizer application, seeding, sod quotes, weed control, irrigation coverage, and lawn care service estimates. Most homeowners either guess based on the lot size listed on a tax record (which includes the house, driveway, and any structures) or they pay a landscaper to measure it for them.

In YardPro, you draw separate areas for each turf zone: front yard, backyard, side yards. Each one calculates its own square footage, and you can see the total by adding them. You can also draw a single large area around the entire lawn if you just need one number. The satellite imagery is accurate enough that the measurements are reliable for material ordering.

If you have irregular lawn shapes around landscaping beds, trees, or a pool, draw those shapes separately and subtract. It takes a few minutes the first time and saves you from redoing the calculation every season.

How Do You Measure a Concrete Pour?

Concrete is ordered by the cubic yard, but the calculation starts with area. You need the square footage of the slab before you can multiply by the depth and convert to yards. Getting that number wrong means either paying for concrete you pour back into the truck or stopping short and calling for a second delivery.

For a standard rectangular pad, the math is simple enough on paper. But driveways, patios, and pathways that curve or have cutouts are harder to calculate accurately. In YardPro, you trace the exact footprint of the pour on the map and get the square footage immediately. Multiply by your pour depth in feet, divide by 27, and you have your cubic yards. No graph paper, no geometry.

Save the area on the map with the label "Concrete Pour" and the date. If the slab ever needs repair or expansion, the original footprint is already there for reference.

How Do You Measure a Repair Area?

Repair areas are typically smaller and more irregular than any other measurement job on a property. A patch of dead turf, a section of damaged irrigation bed, a cracked section of pavement, or a corroded drip line zone all need to be sized before you can order the right amount of material or quote the repair accurately.

Drawing a repair area in YardPro takes about 30 seconds. Trace the boundary of the damaged zone, label it with the issue, add a photo, and save it. Now you have the square footage for material ordering and a pinned location on the map so whoever does the repair can find it without a tour of the property.

For landscaping and irrigation crews, this is particularly useful when repairs are delegated. The superintendent or homeowner drops a pin at the repair area, attaches the measurement and a photo, assigns it as a task, and the tech goes directly to the right spot on the map. No walking the property, no "it is near the big oak on the left side."

How Does the Area Tool Work in YardPro?

The area tool in YardPro works the same way for every shape. Open your property map, tap the area icon, and start drawing. You can tap corners on the satellite view to trace a shape from above, or walk the boundary with GPS active and let the app record your path. When you close the shape, YardPro calculates the square footage instantly and displays it on the map.

From there you can add a label, assign a category (turf, water feature, hardscape, repair, or any custom category you create), attach photos, and add notes. The area stays saved on the map and is visible to everyone on your team who has access to the property.

YardPro gives you three map layers that work together: markers for specific points, lines for tracing pipes or edges, and areas for measuring enclosed spaces. No other property management app at this price point gives you all three. The Areas tutorial video below walks through the full process in under five minutes.

The area tool is available on all YardPro plans. For landscaping contractors, golf courses, and commercial properties, areas also integrate with the task system: draw an area around a zone, assign a task inside it, and YardPro automatically labels the task with the area name so your crew always knows exactly where the work is.

If you have not mapped your property yet, start with one area this week. Pick the measurement you have been meaning to get, draw it in YardPro, and you will have an accurate number in under two minutes. It saves on your map automatically, ready for the next time you need it.