‹ Back to the blog
How ToFeaturesProperty Management

Never Guess Where Your Christmas Lights Go Again

Never Guess Where Your Christmas Lights Go Again

YardPro is the easiest way to remember exactly how your Christmas lights go up, because it turns last year's guesswork into a map you follow. Mark where each strand runs, which outlet it plugs into, and what it looks like finished, with photos pinned to the exact spot on your own property. Map the setup once and every December after that is assembly, not archaeology.

The mystery box problem

You know the box. It comes down from the garage shelf once a year, full of tangled strands that all look the same. Which one is the long run for the roofline? Which one goes on the hedge? Which plug reaches the outlet by the porch, and which one needs the extension cord? Last year you figured all of this out, and then the knowledge went back in the box with the lights.

So every year starts the same way: untangle everything, plug strands in one at a time to see what works, carry them around the yard trying to remember the layout, and rediscover the hard way that one run does not reach its outlet.

Watch the full walkthrough

If the video does not load, watch it here: Christmas lights in YardPro on YouTube.

How to map your light setup in YardPro

While the lights are going up this year, capture the setup as you go. It only takes a moment at each step:

  1. Draw each strand as a line. Trace the roofline run, the fence run, and the walkway run on your property map. Name each line after the strand, so the label on the map matches the label you put on the cord.
  2. Mark every outlet and connection. Drop a marker where each strand plugs in, including the outlet behind the bushes you forget about every single year. If two strands join at a corner, mark that too.
  3. Attach photos to the markers. Take a photo of each plug in its outlet and of each mounting detail, like how the clips sit on the gutter. Next year you are not describing it from memory, you are looking at it.
  4. Photograph the finished result at night. Pin a few night shots of the house with everything lit. That is your reference for what done looks like, and your proof that the layout works.

Next December, follow the map

Here is the payoff. Next year you open YardPro before you open the box. The map tells you which strand comes out first, where it runs, and where it plugs in. The photos show every connection. The night shots show the finished look you are rebuilding. Setup turns into following directions instead of solving a puzzle, and anyone in the family can do it, because the knowledge lives on the map instead of in one person's head.

It is not just for lights

Holiday lights are a perfect first project because the pain shows up on a schedule, but the same trick works for everything on your property that you set up, bury, or put away: where the sprinkler valves are, where the drip line runs, which breaker feeds the shed, where the downspout drain goes. YardPro keeps all of it on one map with markers, lines, areas, and photos, so your property finally has a memory.

Map the lights this year and thank yourself next year. Start your YardPro free trial and put your whole setup on the map.